Kemsol Hypo Outdoor Cleaner 2.5L with Spray Applicator

Information

Kemsol Hypo Outdoor Cleaner 2.5L with Spray Applicator

Dirt, Algae, Mould & Mildew Cleaner

A fast-acting outdoor cleaner designed to remove dirt, algae, mould and mildew from a wide range of exterior surfaces. Ideal for concrete, building cladding and most exterior surfaces — simply spray, brush and rinse for immediate and effective results.

Directions:

1. Attach the hose to the spray applicator.
   
2. Adjust the nozzle to Fan for general use or remove nozzle tip for a Jet spray.
3. Ensure the dial is set to OFF.
4. Turn on the tap. Briefly switch the dial to WATER to check pressure, then return it to OFF.
5. Turn the dial to SPRAY to begin application. Apply the product to a dry surface, working from top to bottom for even coverage.
6. Allow the product to sit for up to 10 minutes (or up to 15 minutes for heavy growth). Do not exceed this time or allow the product to dry.
7. For best results, scrub the wet surface with a suitable brush.
8. Rinse thoroughly with clean water by switching the dial back to the WATER setting.
9. Turn the dial to OFF once finished. Disconnect the hose, and store upright.
   

Please Note:

• Tough build-up may require a second treatment after 1–2 months.
  
• Some painted finishes may need a more thorough rinse to prevent streaking.
  
• In case of accidental contact with plants or lawn areas, rinse immediately with clean water. Disconnect downpipes from water tanks to prevent contamination from wash runoff.